Rip Saw - TIMBrip

Availability

Any UK Site.

Duration

Variable depending upon training levels required.

Examinations

To HSE Regulations – Practical – Knowledge & Pre Use

Course Style

Practical and Knowledge based

Certificates

A4 Positive Identification with pocket card to HSE Regulations -PUWER,HASAWA, MHASAWA, & ACOP L114

Additional Information

Access to the operating area, the machine, a supply of timber for training and a room / office suitable for the number of delegates will be required.

Notes

Typical Course Contents

Typically a basic course will be 1 to 3 days dependant upon number of delegates and experience. All courses are based on the HSE PUWER regulations as applied to woodworking machines, HASAWA, MHASAWA, ACOP’s, Industry trade bodies and recognised best practice with full certification accordingly.

Courses typically Include:- The tasks machine is designed for. The main causes of accidents at the machine. LEV Systems Isolation procedures. Pre Use Checks & Reporting. Personal protective equipment requirements. Stopping procedures including the use of brakes where fitted. How to use and adjust guards. Safe working practices. How to use protection devices and appliances. Training specific to the particular job or task under close supervision

More Timber/Woodmachines : Woodmachine Operator

Band ReSaw

Used to cut timber along its length reducing timber widths leaving a 'sawn' rough finish. All cou...

Bench Panel Saw

More

Chainsaw Basic Use

This course is designed to provide an understanding of the HASAWA regulations, Provision and Use of Work Equipment Regulations ...

Chop Saw

Used to cut tim...

Circular Saw

Depending on the blade selected, the circular saw can be used to cut across or with the grain as well as cutting manufactured boar...

Cross Cut Saw

More

Dimension Saw

The Dimension saw is a dirivative of the bench panel saw and is often used to cut timber panels of varying sizes, with the correct...

Fixed Pack Saw

Based on the chainsaw, a fixed unit used predominantly for batch cutting packs of timber to length. All courses will encompass ind...

Health & Safety In timber Based Operations (Induction)

Designed to assist employers in meeting their legal responsibilities in ensuring new staff are aware of basic health and safety re...

Manual Handling in timber Operations

This fully certificated course is designed to instruct operators in the correct and safe methods of manual handling within the tim...

Mitre Saw

Similar to the chop saw, the mitre saw used to cut timber across the grain at 90 degrees to length, it can also cut to an angle on...

Mobile Pack Saw

Based on the basic chainsaw, a mobile unit used for cutting packs of timber to length. All courses will encompass individual compa...

Morticer

As the name suggests, a machine used for for creating a mortice. All courses will encompass individual companies working environme...

Narrow Bandsaw

Used to cut straight line and to facilitate curved cuts or cut shapes into timber. All courses will encompass individual companies...

Pendulam Cross Cut Saw

A dirivative of the cross cut saw, used to cut timber across the grain at 90 degrees to length, depending upon blade fitted can al...

Planer Edger

To plane the edge of timber to give a smooth finish to the required width. All courses will encompass individual companies working...

Planer Moulder

Used to create miltiple profiles in a single pass, also known as milti cutter, or 6/5/4 cutter. All courses will encompass individ...

Planer Thicknesser

Machines combining the ability to surface plane timber and give a straight face & edge and plane to a pre determined thickness to ...

Radial Arm Saw

A dirivative of the cross cut saw, used to cut across or with the grain as well as cutting manufactured boards and plastic materia...

Router - Overhead

To cut channels, elongate holes, cut a recess, to profile etc. All courses will encompass individual companies working environment...

Spindle Moulder

To plane timber to give a smooth profiled finish along its length. All courses will encompass individual companies working environ...

Surface / Overhead Planer

Used used to give a straight face & edge on timber prior to thicknessing. All courses will encompass individual companies working ...

Tenoner

As the name suggests, a machine used for for creating a tenon. All courses will encompass individual companies working environment...

Thicknesser

Used to plane to a pre determined thickness to give a smooth finish. All courses will encompass individual companies working envir...

Up Cut Saw

A derivative of the cross cut saw. Used to cut timber across the grain at 90 degrees to length, or with mitre properties depending...

Wall Saw/Vertical Saw

As the name suggests, the wall saw is a space saving vertical based saw used to cut timber panels of varying sizes, with the corre...